Bienvenido, Invitado
Nombre de Usuario: Contraseña: Recordarme
  • Página:
  • 1
  • 2

TEMA: Can be a Coelian as he would have in 1946

Can be a Coelian as he would have in 1946 4 años 1 mes antes #63427

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
And again a little further .

Since I could find an old and coincidentally suitable servo for tube evolation in my scraps box I've inspired me from Ralf's installation inspired in his Coelian and flanges the servo as Ralf on the side and connect it easy with a pen as a clutch .



I just had to come up with a bracket with the I set the servo exactly to the pivot point of the trailer and it also can extend to me again .



Thus, the carriage rotates with I drill in to any site through lid , mount and bearing spines a hole through which I later put a long screw . So I can be also pivot the rangefinder with the mount syncron of the other side with a lever then .

By the way , I have also drawn the lack of rolling shutter and will make this again with my 3 D printer. Since there are different drawings and pictures of the wood tower to the rolling shutter , I have opted for the larger version as this would have provided just more space inside.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 4 años 1 mes antes #63443

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
After I then had Evolation actually went as far as the problems go. Everything was just not accuratly enough and got stuck forever. After I had everything disassembled I also saw huge wear on the resin.





So I mounted the carriage and reasonable first 4 collars turned from steel.









Also, two new bolts made ​​of brass.



So I have the bearing rings now glued and aligned in the mount and the tower.





Now the carriage moves smoothly and accuratly

By the way my printer yet the two parts has printed to the rolling shutter.



After a few adjustments I have this then glued to the mount and this is the result . The tower has an immediate effect quite different.





Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Última Edición: por Edwin.

Can be a Coelian as he would have in 1946 4 años 1 mes antes #63511

I´m sure that you has designed the recoil System for the Gun Barrels . I had ever seen an easy System at a German Fórum, but i don´t remember where :blink:

Seguro que ya has diseñado el Sistema de Retroceso. He visto uno muy sencillo en un Foro Aleman, pero no recuedo donde. :blink:

Modelismo Militar RC Madrid. Club Butarken Camp

Panther HL
T-34/ 85 WSN
T-34/76 TORRO
Kfz 15 Artesanal
Mercedes 170V Artesanal
Tiger I HL
Elefant HOOBEN

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Modelismo Militar RC Madrid. Club Butarken Camp

Panther HL
T-34/ 85 WSN
T-34/76 TORRO
Kfz 15 Artesanal
Mercedes 170V Artesanal
Tiger I HL
Elefant HOOBEN

Can be a Coelian as he would have in 1946 4 años 1 mes antes #63517

  • Jussek
  • Avatar de Jussek
  • Fuera de línea
  • Moderador de 1ª Clase
  • Moderador de 1ª Clase
  • Mensajes: 1280
  • Gracias recibidas: 273

Dampflok escribió: I´m sure that you has designed the recoil System for the Gun Barrels . I had ever seen an easy System at a German Fórum, but i don´t remember where :blink:

Seguro que ya has diseñado el Sistema de Retroceso. He visto uno muy sencillo en un Foro Aleman, pero no recuedo donde. :blink:


do you mean this one? it's an english spoken forum

www.rctankwarfare.co.uk/forums/viewtopic...ilit=coelian#p115163

this one is in german

www.heng-long-panzerforum.com/index.php?...=3&highlight=coelian

but a video, i can only find this one:




Dampflok, creo que to tambien lo he visto, pero ahora no soy capaz de encontrarlo!

OKW - Panzergruppe Tarraco

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

OKW - Panzergruppe Tarraco

Can be a Coelian as he would have in 1946 4 años 1 mes antes #63533

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
You mean surely this building report by Ralf in MM forum.

mmodell.de/forum/index.php?page=Thread&p...t=coelian#post102797

I know personally, and Ralf was just looking at his Coelian at the exhibition in Munster, but I have a little something else before

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 4 años 1 mes antes #63540

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
From Munster I'm back and now I associate the same time several of things.

I have for my printer for some time a finer nozzle lie that I want to finally try and do I need for my Coelian nor the curved Flamkiller.
So I sat down and which drawn.



The printer I have rebuilt and now I have to find the correct settings for this nozzle has 0.35 mm. This is not done with a pressure.
But the first test prints can hope. In particular, the grid succeed almost immediately useful.







For comparison, .... the parts have a diameter of 15mm.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 4 años 1 mes antes #63564

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
Among many other things, it is also here a little bit further.

I had installed the 0.35 mm nozzle in my printer, but begins finding the right setting completely from scratch and you have to try much until it does. At least acceptable grid Struck doors succeed. for full body I have not yet found the right setting, but already produced a small box of insufficient test a hurry.



After the dismantling of a 0.5 mm nozzle it worked much better for it right away, and even the first term would be almost useful.



By the way, I bent my foot plates of etched parts deal.



After sorting for the correct assembly I could see the steel sheet and solder together into two strips per page.





Now I can think about it as I best mount to the hull.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 4 años 4 semanas antes #63598

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
The foot plates I have now soldered to the extent done for both sides and was now able to stick to the tub it.





This looks the same with genuine tin quite different from the plastic parts.

The Flammvernichter are me now succeeded in sufficient quality.







After sanding and priming one sees nothing more from the pressure, just as the exhaust pipes I make new again. The so not like me.

[Img]http//up.picr.de/18643493dd.jpg
After I was again yesterday at Asiatam I have taken my Flack pipes and am pleasantly surprised that they are pierced in its entire length, which jan is not so simple. I had not expected.



So I sat down today and by the way even turned the muzzle brakes to brass.









That was not easy to turn these little trumpets, and they still get 4 rows of holes in each side.



And so I then glued to the tube ends.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 4 años 3 semanas antes #63608

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
now I am finally now also here to make a little further.

After I glued the muzzle brakes with the pipes I had this a little with a 8mm brass tube extended by a good guide to get the recoil.



This happens in each one 9mm brass tube.



For installation of the guide tubes I drill carefully on the 9mm and stick a the two tubes.









For each tube to Build a Micro Servo on what I cropping as the back wall of the mount and servos einpasse on a plastic plate.











The articulation of each tube is now quite simple.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 4 años 3 semanas antes #63612

I can´t find the Fórum that have de Recoil System :( but i´ll try do a Drawing explaining it, is more easy tan using Servos.
In spite of, good Job :)

Modelismo Militar RC Madrid. Club Butarken Camp

Panther HL
T-34/ 85 WSN
T-34/76 TORRO
Kfz 15 Artesanal
Mercedes 170V Artesanal
Tiger I HL
Elefant HOOBEN

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Modelismo Militar RC Madrid. Club Butarken Camp

Panther HL
T-34/ 85 WSN
T-34/76 TORRO
Kfz 15 Artesanal
Mercedes 170V Artesanal
Tiger I HL
Elefant HOOBEN

Can be a Coelian as he would have in 1946 4 años 3 semanas antes #63613

This is the Drawing, the Idea is like a Bicycle Pedals.



Modelismo Militar RC Madrid. Club Butarken Camp

Panther HL
T-34/ 85 WSN
T-34/76 TORRO
Kfz 15 Artesanal
Mercedes 170V Artesanal
Tiger I HL
Elefant HOOBEN

Adjuntos:

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Modelismo Militar RC Madrid. Club Butarken Camp

Panther HL
T-34/ 85 WSN
T-34/76 TORRO
Kfz 15 Artesanal
Mercedes 170V Artesanal
Tiger I HL
Elefant HOOBEN

Can be a Coelian as he would have in 1946 4 años 3 semanas antes #63618

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
I make the recoil very different and therefore need two servos.

In principle, it is possible a servo in the middle between both tubes to set, however, as in the system of Dampflok movement will not work properly because the tubes are articulated in a central position and only uniformly before and swing back.

For me, the pipes should quickly run back and forward slowly and always in the end position. Plus a large selection in an asymmetric firing sequence, tuned to the movement bang and flash.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 4 años 3 semanas antes #63635

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
With a few little things I have done further.

Since my exhaust pipes I have not liked made ​​me new. In addition I have cut off a brass tube at a 45 ° angle and soldered with a lot of tin and smoothed.



So the Flammvernichter are now correct.





Since I was only in Asiatam, I have taken the front hatches and built into the Panther. In addition I have cut out the opening, filed and glued from below a plastic frame. So then I could stick the plate on this framework and have such a closed gap.





I must still refine a little, but as I now have two stable and functional hatches.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 3 años 11 meses antes #64258

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
I'm once again a little bit on my Coelian on.

First, I took care of the exhaust the ever so wobbled while driving. So I've drawn and printed the upper brackets, which is all the prophecies of doom perfectly applicable in defiance even in this scale. Now he keeps good and tight.







Da da worked so well I'm thinking on making even more so.

Then I have now started with the welds and this literally knitted with the hot needle.







How and where do I get this on the tower and the lower hull do I must still consider and even so I'm going to also look at some pictures to it.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Can be a Coelian as he would have in 1946 3 años 10 meses antes #65257

  • Edwin
  • Avatar de Edwin Autor del tema
  • Fuera de línea
  • Teniente
  • Teniente
  • Edwin
  • Mensajes: 355
  • Gracias recibidas: 27
Since I usually come to nothing I could at least try a little further in 3D printing and me the debris guard and the battle space heating cover print.





What you can not see properly on the pictures is that I was able to print the grid in three dimensions and not just smooth sheets as there are those as-etched parts.

I am still not completely satisfied ..... there is one more thing ....

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

  • Página:
  • 1
  • 2
Gracias a Foro Kunena
Joomla templates by a4joomla