The holders of the visor are now glued . But this I first had to drill through the mounting points and also set a new one , as the Intended is the wrong place .
In addition I have pierced the roof with a 1.2 mm drill and freehand extremely carefully milled with a 1.2 mm tungsten carbide bur the slots . If it has no feeling but should rather be , since it can be an expensive quickly with broken cutters.
So I had to cut only two small brass strip , bend and push through the long holes . At the bottom I have then also bent and glued .
When, after the adhesive has cured everything was nice too smoothly , I can now start to assemble the mechanism.